on-dash monitor in-dash monitor in-dash DVD player DVD changer All-In-One Accessories Alarm System   Registration Shipment Tracking FAQ Contact Us   #WW168 Sold Out FM Frequency TWO-WAY Car Alarm System with 2 LCD Remote Controls LCD PAGER REMOTE ENGINE STARTER (1.5Km) Turbo Timer CAR ALARM KEYLESS COMBO Auto Central Locking When driving, you can control the locks of your vehicle by pressing the button of the remote. After the engine started & door closed with either the hand brake released or the foot brake stepped, the central lock will automatically locked. Auto Arming After the alarm is release, the system will return to be armed if the door isn't opened in 30 seconds. Roadside Parking Caution After you parked your car and open the door, the turning light will flash at once. In order to inform the coming car to pay attention to safety. Transmitter Learning Process If the original remote control is lost of damaged, you may contact us to purchase 1 or 2 additional remote controllers with the same model and design. By using its default transmitter learning process, you can simply replace the old one with the new remote control with simple steps. *Every main board has two remote control devices at most. Emergency Release of Warning Alternative way to release the alarm if remote controller fails or damaged. Remote Control to Startup LCD Function Show The State of Receiving and Transmitting Signal Mute Mode Lock (Armed) Sound Mode Unlock (Disarmed) Remote Control Success (Startup Type) Open Baggage Box Emit Heat Function (Startup Type) Door Opened Battery Electricity Capacity Show Shake or Hit of Car Body Specifications: Main unit of the car alarm: Working Electric Voltage: DC12V Electric Current of the Static State: <20mA The Outputting Electric Current: Changing Direction Light: 7.5A * 2 Trumpet: 10A Central Controlled Lock: 10A Working Frequency: 430.5MHz Intensity of field: average 6000Uv/m at three meter. Remote Control: Working Electric Voltage: 1.5V Average Electric Current of the Static State: <500uA Working Frequency: 430.5MHz The Shock Sensor: Working Electric Voltage: DC 12V The Electric Current of the Static State: <2mA Come with detail wire diagram for your installation! *Car is not included!